regulation ece no. 100: electrical safety relating the powertrain of electric vehicles

Field of application:

Safety requirements relating to the electric powertrain of road vehicles of categories M and N, with a maximum design speed exceeding 25 km / h, equipped with one or more electric traction motors and not permanently connected to the network.

Safety requirements relating to the rechargeable energy storage system (REESS) of road vehicles of categories M and N equipped with one or more traction motors powered by electricity and not permanently connected to the network.

Application for approval:

The application for approval of a vehicle type with regard to specific requirements of the electric power train must be submitted by the vehicle manufacturer or his representative. The application must be accompanied by the following documents, and by the following information:

  • Detailed description of the vehicle type with regard to the electric power train and the galvanically connected high voltage bus;
  • For vehicles equipped with REESS, additional evidence confirming that the latter complies with the requirements of point 6. of this Regulation.

Approval of a rechargeable energy storage system (REESS):

The application for approval of a type of REESS, with regard to the safety requirements of the REESS, must be submitted by the manufacturer of the REESS or by his representative. The application must be accompanied by the following documents, and conform to the following specifications:

  • Detailed description of the type of REESS or of an independent technical unit with regard to the security of the REESS;
  • One or more representative components of the type of REESS to be approved plus, at the discretion of the manufacturer and with the agreement of the technical service, the parts of the vehicle considered essential for the test by the technical service must be submitted to the technical service carrying out the approval tests;
  • Before granting type-approval, the type-approval authority must satisfy itself that satisfactory arrangements exist to ensure effective control of the conformity of production.
Approval:

If the type submitted for approval under this Regulation meets the requirements of the relevant parts of this Regulation, approval of that type shall be granted. 
 

Vehicle electrical safety requirements set out in the Regulations:

  • Electric shock protection;
  • Direct contact protection;
  • To protect live parts inside the passenger compartment or luggage compartment, the degree of protection IPXXD must be achieved;
  • Protection from indirect contact.

Laboratory tests:

  • Vibration;
  • Thermal shock and cyclic variation test;
  • Mechanical integrity;
  • Mechanical impact;
  • Fire resistant.

During the tests listed above, there must be no trace of: electrolyte leakage, breakage, fire, explosion.

ATS Group as Technical Service designated by different Authorities and as an Inspection Body, carries out inspections on the testing activities carried out directly at the authorized operating offices of the Manufacturer or recognized Laboratories, for the issue of the Final Inspection Report and the subsequent Type Approval Certificate issued by the Competent Authority.

ATS adapts and conforms strictly to the standards of ISO 17025, and performs the tests required by the regulatory acts for which it has also been designated in the infrastructures of a manufacturer or a third party, in the field of Automotive, in order to respond in the best possible way. to the needs of manufacturers and to be more in line with what is required by the Regulations.

ATS, thanks to a network of accredited and recognized test laboratories, is able to perform reliability and type apprival tests of vehicles and components, in compliance with the main national and international standards or according to specific customer requests.

wy choose ats group?

ATS Group is a group of companies operating in the field
of Inspections, Certifications and Type Approvals in the Automotive sector.

kh.jpg

type approval of whole vehicles

ATS Group, through its companies designated by e24 and e5 marks, is able to issue the type approval of complete vehicles.

jkjk.jpg

type approval of vechicles parts

With the type approval Approval Authority designations (E57), (E5) and (E24) ATS Group is able to carry out approvals of components, systems and technical units of vehicles in general.

2FpjJnuuG6

certifications

ATS Europe, as a Certification Body accredited under ISO 17021-1: 2015 as a Certification Body for Quality Management Systems under ISO 9001: 2015, has become a leading company in the field of certifications.

WLTP-base.jpg

testing laboratories

ATS Group is also equipped with instrumentation, designed and built in such a way as to be easily transported. With this mobile equipment it is possible to carry out the approval tests at the manufacturers and / or the test centers where the type approval are carried out.

app.png

ats app

Our proprietary online platform can manage the whole approval process, fron the quotation till the direct download on the final Type Approval Certificate.

vvv.jpg

competitives prices based on market analysis

We work worldwide through our branches. A big slice of our business comes from Asia and we have a good relationship and expertise with foreign collaborators and clients.

contact us for specific information relating to our services

Head Quarter

ATS Group
Strada dell'Alpo, 20 - Verona, Italia

Mail

info@ats-group.org

Phone

+39 045 585 023

Contact us for specific information relating to our services.

Contact us and our technicians will answer you as soon as possible based on your needs.

fill up the form and contact us!

sign up to our newsletter

Stay up to date on all regulatory developments in the Automotive sector, on the various developments of the ATS Group, on all the Services that the Group is able to offer. Fill in the form fields below and you will receive content that is always up-to-date and of quality. ATS Group, Comply With Compliance.

[mc4wp_form id="5722"]